Fittings for pressure washers DKF W

DKF-W hydraulic fittings are designed to connect a high pressure hose to a washing gun, generally, this type of fitting is purchased by car washes, cleaning companies for use on high pressure washers. DKF-W fittings are used for pressure testing of high pressure hoses for sinks.

During operation, this type of fitting is exposed to aggressive media (various detergents, solvents), so the manufacturer manufactures DKF W fittings from brass,  stainless steel, galvanizing carbon steel . But most clients want the Brass nut.

Fitting for high pressure hose DKF W

Our range includes DKF-W fittings of the Professional class. This class includes products of the premium segment, which are distinguished by the highest quality, reliability of the materials used, and long service life.

Our company offers the widest range of premium fittings made in china. Each shipment is carried out from our warehouse . The production capacity of our partner, as well as the modern equipment of the plant, allows us to satisfy any demand for products in this segment. The company has the ability to manufacture products according to your drawings in a short time.

Buy fittings DKF W for sinks

In our company you can buy a DKF-W fitting with a 22×1.5 threaded nut, as well as fittings of various sizes and configurations.

DKL fitting 

DKL – fittings of this type are manufactured according to the German DIN standard. DKL series hose fittings have a cylindrical nipple shape that allows them to be used with 24 and 60° cone fittings. The DKL fitting is most often found in domestic mechanical engineering, it is widely used in the agricultural sector, in construction. As a rule, DKL fittings are produced in the range of metric threads from M12x1.5 to M 52×2. Our range includes fittings with threads from M14x1.5 to M26x1.5.

DKM fittings

DKM fittings, like other fittings of the German DIN standard, have metric threads, however, the inner cone of the fitting is 60°. This difference does not allow the use of these fittings when connecting pipes with a cutting ring. DKM fittings are recommended for use in medium pressure systems. As a rule, DKM fittings are used in pairs with high pressure hoses with one and two braids, as well as high pressure winding hoses. In case of use in tandem with coiled sleeves, do not forget about the obligatory removal of the outer layer of rubber from the sleeve. When crimping braided hoses, rubber removal is not required.

Fitting DKOL

DKOL fittings are manufactured according to the German DIN standard (stands for Deutsches Institut fur Normung).

The DKOL fitting has a metric thread, a 24° cone, and there is an additional sealing ring at the end of the cone. This fitting is available in a range of sizes from 5 to 51 mm. The mating part can be with a rubber seal on the cone, it can be a tube with a cutting ring and a nut, as well as a universal connector with a spherical cone from 24 to 60°. In order to determine the angle of the cone and the thread, it is necessary to use a special measuring set.

Fitting DKOS

DKOS  fittings are manufactured according to the German DIN standard (stands for Deutsches Institut fur Normung).

The DKOS fitting has a metric thread, a 24° cone, and there is an additional sealing ring at the end of the cone heavy duty type fittings.