The quality of auto parts mold maintenance not only affects the life of the mold, but also has a significant impact on the production plan, and even affects the final manufacturing cost.

The maintenance personnel who are responsible for the daily maintenance of auto parts molds must work carefully and carefully to ensure the best condition of the molds, and be effective and economical during production as scheduled, and reduce manufacturing costs as much as possible. The following are some basic maintenance knowledge compiled by Aojie Mould for you.

When car parts mold maintenance, it is necessary to check the parts according to the drawings. Even if there is no special instruction, it must be checked during storage; it is not allowed to modify the size of mold parts that do not meet the requirements of the drawing, or use spacers or gaskets for additional insertion, etc.; mold maintenance after the completion of the production order , Must refer to the problem points provided by the production department, production department records and final products; in the maintenance of auto parts molds, if major problems are found, they should immediately report to the supervisor and wait for instructions.

Secondly, the specific requirements for the maintenance of auto parts molds: when replacing mold parts, confirm that the quality of the parts to be replaced is qualified; disassembly and assembly of each part should be tapped and slowly pressed; when auto parts mold inserts are assembled, confirm that the fit gap is qualified; Avoid warping, scratches, pits, dross, defects, rust, etc. on the surface of the parts; if any parts are replaced, communicate and confirm with the mold design department in time. Before and after disassembly of the mold, pay attention to maintaining the pulling balance of each part; if any The parts that need to be replaced must be replaced in time.

Finally, the daily maintenance of automobile molds must be carried out carefully and carefully to ensure that the automobile parts molds are kept in a better condition at all times.

Sinopulse is hydraulic hose manufacturers was established at 2001.We have professional production and manufacturing experiences.Our hoses are mainly exported to South America,Italy,United Kingdom,Middle East countries,Africa and Asia countries.